TEMPSENSE_PD=POWERED, ADC_PD=POWERED, IRCOUT_PD=POWERED, SYSOSC_PD=POWERED, FLASH_PD=POWERED, SYSPLL_PD=POWERED, WDTOSC_PD=POWERED, BOD_PD=POWERED, IRC_PD=POWERED
Power configuration register
| IRCOUT_PD | IRC oscillator output power-down 0 (POWERED): Powered 1 (POWERED_DOWN): Powered down |
| IRC_PD | IRC oscillator power-down 0 (POWERED): Powered 1 (POWERED_DOWN): Powered down |
| FLASH_PD | Flash power-down 0 (POWERED): Powered 1 (POWERED_DOWN): Powered down |
| BOD_PD | BOD power-down 0 (POWERED): Powered 1 (POWERED_DOWN): Powered down |
| ADC_PD | ADC power-down 0 (POWERED): Powered 1 (POWERED_DOWN): Powered down |
| SYSOSC_PD | Crystal oscillator power-down. After power-up, add a software delay of approximately 500 us before using. 0 (POWERED): Powered 1 (POWERED_DOWN): Powered down |
| WDTOSC_PD | Watchdog oscillator power-down 0 (POWERED): Powered 1 (POWERED_DOWN): Powered down |
| SYSPLL_PD | System PLL power-down 0 (POWERED): Powered 1 (POWERED_DOWN): Powered down |
| RESERVED | Reserved |
| RESERVED | Reserved. Always write this bit as 0. |
| RESERVED | Reserved |
| RESERVED | Reserved. This bit must be set to one in Run mode. |
| RESERVED | Reserved. |
| TEMPSENSE_PD | Temperature sensor wake-up configuration 0 (POWERED): Powered 1 (POWERED_DOWN): Powered down |
| RESERVED | Reserved. Always write these bits as 0b11. |
| RESERVED | Reserved |